资源类型

期刊论文 65

年份

2023 5

2022 5

2021 4

2020 2

2019 4

2018 1

2017 4

2016 6

2015 4

2014 3

2013 2

2012 2

2011 1

2010 4

2009 1

2008 3

2007 5

2005 4

2004 2

2003 1

展开 ︾

关键词

ANSYS 1

ARM 1

CAN总线 1

CCD影像 1

CFD 1

Nelder-Mead单纯形法 1

S 特性 1

T形节点 1

V形坑 1

体积应变 1

侧边曲线方程 1

侵彻 1

净形铸造 1

凝固过程 1

刮板输送机 1

剪切带 1

剪切应变 1

压力脉动 1

反射阵；双极化；赋形波束；限相位综合 1

展开 ︾

检索范围：

排序： 展示方式：

Novel piezoelectric pump with “E”-shaped valve found from sub-experiments

Jianhui ZHANG, Jun HUANG, Xiaoqi HU, Qixiao XI,

《机械工程前沿（英文）》 2010年 第5卷 第2期   页码 212-218 doi: 10.1007/s11465-010-0009-x

摘要： Increasing the driving frequency of a piezoelectric vibrator can resolve the bottleneck of low flow in a valve piezoelectric pump. However, a piezoelectric pump of a traditional valve body presents the hysteretic nature of the valve, and macroscopic performance is up-frequency to flow-sharply. This research is to settle the bottleneck mentioned above. First, through the sub-experiment on various parameters of the plate valve of a piezoelectric pump, the reasons why a valve body itself can influence “up-frequency to flow-sharply”, which causes the hysteretic nature of the valve, were discovered. Second, an “E”-shaped valve and piezoelectric pump with an “E”-shaped valve (PPEV) were invented. Finally, the efficiency of PPEV has been proved helpful to reduce hysteretic nature in experiments. Under the similar conditions, compared with traditional pumps, the driving frequency of novel PPEV can be more than 10 times high, and the flow rate also can be several times high.

关键词： piezoelectricity     valve     pump     experiment     “     E”     -shaped valve    

HTML PDF 收藏

A novel flow electrode capacitive deionization device with spindle-shaped desalting chamber

《环境科学与工程前沿（英文）》 2023年 第18卷 第4期 doi: 10.1007/s11783-024-1800-y

摘要：

● A spindle-shaped influent chamber was designed and equipped in FCDI system.

关键词： Spindle-shaped chamber     Desalination performance     Flow electrode capacitive deionization    

HTML PDF 收藏

Nonlinear sealing force of a seawater balance valve used in an 11000-meter manned submersible

《机械工程前沿（英文）》 2023年 第18卷 第1期 doi: 10.1007/s11465-022-0726-y

摘要： Balance valve is a core component of the 11000-meter manned submersible “struggle,” and its sealing performance is crucial and challenging when the maximum pressure difference is 118 MPa. The increasing sealing force improves the sealing performance and increases the system’s energy consumption at the same time. A hybrid analytical–numerical–experimental (ANE) model is proposed to obtain the minimum sealing force, ensuring no leakage at the valve port and reducing energy consumption as much as possible. The effects of roundness error, environmental pressure, and materials on the minimum sealing force are considered in the ANE model. The basic form of minimum sealing force equations is established, and the remaining unknown coefficients of the equations are obtained by the finite element method (FEM). The accuracy of the equation is evaluated by comparing the independent FEM data to the equation data. Results of the comparison show good agreement, and the difference between the independent FEM data and equation data is within 3% when the environmental pressure is 0–118 MPa. Finally, the minimum sealing force equation is applied in a balance valve to be experimented using a deep-sea simulation device. The balance valve designed through the minimum sealing force equation is leak-free in the experiment. Thus, the minimum sealing force equation is suitable for the ultrahigh pressure balance valve and has guiding significance for evaluating the sealing performance of ultrahigh pressure balance valves.

关键词： seawater balance valve     sealing performance     hybrid ANE model     FEM     minimum sealing force equation    

HTML PDF 收藏

Artificial bee colony optimization for economic dispatch with valve point effect

Yacine LABBI,Djilani Ben ATTOUS,Belkacem MAHDAD

《能源前沿（英文）》 2014年 第8卷 第4期   页码 449-458 doi: 10.1007/s11708-014-0316-8

摘要： In recent years, various heuristic optimization methods have been proposed to solve economic dispatch (ED) problem in power systems. This paper presents the well-known power system ED problem solution considering valve-point effect by a new optimization algorithm called artificial bee colony (ABC). The proposed approach has been applied to various test systems with incremental fuel cost function, taking into account the valve-point effects. The results show that the proposed approach is efficient and robust when compared with other optimization algorithms reported in literature.

关键词： artificial bee colony (ABC) algorithm     economic dispatch (ED)     valve-point effect     optimization    

HTML PDF 收藏

Development of a novel two-stage proportional valve with a pilot digital flow distribution

Qiang GAO, Yuchuan ZHU, Changwen WU, Yulei JIANG

《机械工程前沿（英文）》 2021年 第16卷 第2期   页码 420-434 doi: 10.1007/s11465-020-0622-2

摘要： Pilot two-stage proportional valves are widely used in high-power hydraulic systems. For the purpose of improving the dynamic performance, reliability, and digitization of the traditional proportional valve, a novel two-stage proportional valve with a pilot digital flow distribution is proposed from the viewpoint of the dual nozzle-flapper valve’s working principle. In particular, the dual nozzle-flapper is decoupled by two high-speed on/off valves (HSVs). First, the working principle and mathematical model of the proposed valve are determined. Then, the influences of the control parameters (duty cycle and switching frequency) and structural parameters (fixed orifice’s diameter and main valve’s spring) on the main valve’s motion are analyzed on the basis of theory, simulation, and experiment. In addition, in optimizing the value of the fixed orifice’s diameter, a new design criterion that considers the maximum pressure sensitivity, flow controllability, and flow linearization is proposed to improve the balance between the effective displacement and the displacement fluctuation of the main valve. The new scheme is verified by simulations and experiments. Experimental results of the closed-loop displacement tracking have demonstrated that the delay time of the main valve is always within 3.5 ms under different working conditions, and the tracking error can be significantly reduced using the higher switching frequency. The amplitude–frequency experiments indicate that a ‒3 dB-frequency of the proposed valve can reach 9.5 Hz in the case of±50% full scale and 15 Hz in the case of 0%–50% full scale. The values can be further improved by increasing the flow rate of the pilot HSV.

关键词： two-stage proportional valve     digital flow distribution     high-speed on/off valve     position tracking characteristic     dynamic performance    

HTML PDF 收藏

Right coronary occlusion following transcatheter aortic valve implantation: two case reports

null

《医学前沿（英文）》 2016年 第10卷 第3期   页码 351-355 doi: 10.1007/s11684-016-0465-8

摘要：

This paper discusses two male patients with severe aortic stenosis, whose right coronary arteries (RCA) were completely occluded during transcatheter aortic valve implantation (TAVI), leading to fatal hemodynamic disorder. Occlusions of RCA complicated by TAVI are rare. In addition, emergency cardiopulmonary bypass (CPB) played a critical role in rescuing our second patient. Both patients were admitted for “severe aortic stenosis,” and TAVIs were performed. The first patient’s blood pressure immediately dropped to 70/40 mmHg after the balloon expansion and did not increase much after the administration of aramine or fluid therapy. He did not receive emergency surgery and died after 1.5 h of resuscitation. The second patient’s blood pressure fluctuated greatly for several minutes after the valve implantation, ranging from 170/100 mmHg to 60/40 mmHg. Angiography revealed a total occlusion of RCA. Thoracic surgery with CPB was performed, and the patient survived.

关键词： aortic stenosis     transcatheter aortic valve implantation     right coronary occlusion     cardiac group    

HTML PDF 收藏

improving left ventricular remodelling and clinical outcome following surgical and trans-catheter aortic valve

《医学前沿（英文）》 2021年 第15卷 第3期   页码 416-437 doi: 10.1007/s11684-021-0852-7

摘要： Over the last half century, surgical aortic valve replacement (SAVR) has evolved to offer a durable and efficient valve haemodynamically, with low procedural complications that allows favourable remodelling of left ventricular (LV) structure and function. The latter has become more challenging among elderly patients, particularly following trans-catheter aortic valve implantation (TAVI). Precise understanding of myocardial adaptation to pressure and volume overloading and its responses to valve surgery requires comprehensive assessments from aortic valve energy loss, valvular-vascular impedance to myocardial activation, force-velocity relationship, and myocardial strain. LV hypertrophy and myocardial fibrosis remains as the structural and morphological focus in this endeavour. Early intervention in asymptomatic aortic stenosis or regurgitation along with individualised management of hypertension and atrial fibrillation is likely to improve patient outcome. Physiological pacing via the His-Purkinje system for conduction abnormalities, further reduction in para-valvular aortic regurgitation along with therapy of angiotensin receptor blockade will improve patient outcome by facilitating hypertrophy regression, LV coordinate contraction, and global vascular function. TAVI leaflet thromboses require anticoagulation while impaired access to coronary ostia risks future TAVI-in-TAVI or coronary interventions. Until comparable long-term durability and the resolution of TAVI related complications become available, SAVR remains the first choice for lower risk younger patients.

关键词： surgical aortic valve replacement     trans-catheter aortic valve implantation     left ventricular hypertrophy and fibrosis     myocardial force-velocity relationship     His-Purkinje pacing     renin-angiotensin system inhibitors     coronary access impairment    

HTML PDF 收藏

Fluid damping clearance in a control valve of injector

ZHANG Jianming, ZHANG Weigang, YANG Bing, WANG Yawei

《机械工程前沿（英文）》 2007年 第2卷 第4期   页码 439-441 doi: 10.1007/s11465-007-0075-x

摘要： A force model of a control valve of injector is set up, and the changes of the fluid damping clearance are investigated on the basis of the results of the computational fluid dynamics (CFD) and the experiments of control valve of injector. Results indicate that a damping clearance of 0.02–0.03 mm between the poppet and the valve guide is the most sufficient to dampen any excessive control valve poppet bouncing.

关键词： control     computational     bouncing     CFD     excessive control    

HTML PDF 收藏

Bending performance of composite bridge deck with T-shaped ribs

Qingtian SU, Changyuan DAI, Xu JIANG

《结构与土木工程前沿（英文）》 2019年 第13卷 第4期   页码 990-997 doi: 10.1007/s11709-019-0532-8

摘要： This paper proposes a new type of steel-concrete composite deck, which is composed of orthotropic steel deck (OSD) with T-shaped ribs, concrete plate and studs connecting OSD and concrete plate. The OSD can act as framework for concrete plate and contribute to load bearing capacity at the same time, which could save construction time. Compared with conventional OSD system, this new type of composite bridge deck can also improve fatigue performance. Considering that this type of composite deck is not yet applied in practical engineering and its mechanical performance is not revealed in previous literatures, two full-scale specimens were designed and manufactured in this research. The mechanical performance, particularly, bending capacity in positive and negative region was carefully tested and analyzed. The load-deflection curve, load-slip relation, strain distribution in concrete and steel were obtained. The test results showed that the plastic performance of this kind of composite bridge deck was satisfying and the bending capacity was high.

关键词： bending performance     composite bridge deck     T-shaped steel ribs    

HTML PDF 收藏

V-shaped substrate for surface and volume enhanced Raman spectroscopic analysis of microplastics

《环境科学与工程前沿（英文）》 2022年 第16卷 第11期 doi: 10.1007/s11783-022-1578-8

摘要：

● V-shaped substrate was obtained for SERS analysis of microplastics (diameter ≈ 1 μm).

关键词： SERS     V-shaped     AAO     Microplastic     Atmospheric aerosol    

HTML PDF 收藏

Solution to economic dispatch problem with valve-point loading effect by using catfish PSO algorithm

K. MURALI,T. JAYABARATHI

《能源前沿（英文）》 2014年 第8卷 第3期   页码 290-296 doi: 10.1007/s11708-014-0305-y

摘要： This paper proposes application of a catfish particle swarm optimization (PSO) algorithm to economic dispatch (ED) problems. The ED problems considered in this paper include valve-point loading effect, power balance constraints, and generator limits. The conventional PSO and catfish PSO algorithms are applied to three different test systems and the solutions obtained are compared with each other and with those reported in literature. The comparison of solutions shows that catfish PSO outperforms the conventional PSO and other methods in terms of solution quality though there is a slight increase in computational time.

关键词： economic dispatch (ED)     valve point loading     catfish particle swarm optimization (PSO)     optimization    

HTML PDF 收藏

Piezoelectric pump with flexible venous valves for active cell transmission

《机械工程前沿（英文）》 2022年 第17卷 第4期 doi: 10.1007/s11465-022-0712-4

摘要： The development of organ-on-a-chip systems demands high requirements for adequate micro-pump performance, which needs excellent performance and effective transport of active cells. In this study, we designed a piezoelectric pump with a flexible venous valve inspired by that of humans. Performance test of the proposed pump with deionized water as the transmission medium shows a maximum output flow rate of 14.95 mL/min when the input voltage is 100 V, and the pump can transfer aqueous solutions of glycerol with a viscosity of 10.8 mPa·s. Cell survival rate can reach 97.22% with a yeast cell culture solution as the transmission medium. A computational model of the electric-solid-liquid multi-physical field coupling of the piezoelectric pump with a flexible venous valve is established, and simulation results are consistent with experimental results. The proposed pump can help to construct the circulating organ-on-a-chip system, and the simple structure and portable application can enrich the design of microfluidic systems. In addition, the multi-physical field coupling computational model established for the proposed piezoelectric pump can provide an in-depth study of the characteristics of the flow field, facilitating the optimal design of the micro-pump and providing a reference for the further study of active cell transport in organ-on-a-chip systems.

关键词： venous valve     flexible venous valve     cell transmission     organ-on-a-chip system     piezoelectric device    

HTML PDF 收藏

Performance of vertical axis water turbine with eye-shaped baffle for pico hydropower

Zhuohuan HU, Dongcheng WANG, Wei LU, Jian CHEN, Yuwen ZHANG

《能源前沿（英文）》 2022年 第16卷 第4期   页码 683-696 doi: 10.1007/s11708-020-0689-9

摘要： A series of inline pico hydropower systems, which could be used in confined space, especially for water distribution networks (WDNs), was designed and investigated. The turbine with an eye-shaped vertical water baffle was developed to evaluate the hydraulic performance. A three-dimensional dynamic mesh was employed and the inlet velocity was considered as the inlet boundary condition, whereas the outlet boundary was set as the outflow. Then, numerical simulations were conducted and the standard turbulence model was found to be the best capable of predicting flow features through the comparison with the experimental results. The effects of the opening diameter of the water baffle and installation angle of the rotor on the flow field in the turbine were investigated. The results suggested that the water baffle opening at = 30 mm and the rotor at a 52° angle could achieve the highest efficiency of 5.93%. The proper eye-shaped baffle not only accelerates the fluid flow and generates positive hydrodynamic torque, but also eliminates the flow separation. The scheme proposed in this paper can be exploited for practical applications in the water pipelines at various conditions and power requirements.

关键词： vertical axis water turbine     eye-shaped     vertical water baffle     pico hydropower    

HTML PDF 收藏

A hybrid BFA-PSO algorithm for economic dispatch with valve-point effects

T. Jayabarathi, Prateek Bahl, Harsha Ohri, Afshin Yazdani, V. Ramesh

《能源前沿（英文）》 2012年 第6卷 第2期   页码 155-163 doi: 10.1007/s11708-012-0189-7

摘要： This paper presents a novel and efficient method for solving the economic dispatch (ED) problems with valve-point effects, by integrating the biased velocity of particle swarm optimization (PSO) to the chemotaxis, swarming and reproduction steps of bacterial foraging algorithm (BFA). To include valve point effects sinusoidal terms are added to the fuel cost function. This makes the ED problems highly non-linear. In order to solve such problems the best cell (or particle) biased velocity (vector) is added to the random velocity of the BFA to reduce randomness in movement (evolution) and to increase swarming. This results in the hybrid bacterial foraging algorithm (HBFA). To demonstrate the effectiveness of the proposed HBFA method, numerical studies have been performed for three different sample systems. Comparison of the results obtained by the HBFA with the BFA and other evolutionary algorithms clearly show that the proposed method outperforms other methods in terms of convergence rate and solution quality in solving the ED problems with valve-point effects.

关键词： bacterial foraging algorithm (BFA)     economic dispatch (ED)     particle swarm optimization (PSO)     valve-point effects    

HTML PDF 收藏

Parametric computational study on butterfly-shaped hysteretic dampers

Ali Reza FARZAMPOUR, Matthew Roy EATHERTON

《结构与土木工程前沿（英文）》 2019年 第13卷 第5期   页码 1214-1226 doi: 10.1007/s11709-019-0550-6

摘要： A parametric computational study is conducted to investigate the shear yielding, flexural yielding, and lateral torsional buckling limit states for butterfly-shaped links. After validating the accuracy of the finite element (FE) modeling approach against previous experiments, 112 computational models with different geometrical properties were constructed and analyzed including consideration of initial imperfections. The resulting yielding moment, corresponding critical shear force, the accumulation of plastic strains through the length of links as well as the amount of energy dissipated are investigated. The results indicate that as the shape of the butterfly-shaped links become too straight or conversely too narrow in the middle, peak accumulated plastic strains increase. The significant effect of plate thickness on the buckling limit state is examined in this study. Results show that overstrength for these links (peak force divided by yield force) is between 1.2 and 4.5, with straight links producing larger overstrength. Additionally, proportioning the links to delay buckling, and designing the links to yield in the flexural mode are shown to improve energy dissipation.

关键词： structural fuse     hysteretic damper     finite element analysis     energy dissipation     initial imperfection     butterfly-shaped links    

HTML PDF 收藏

标题 作者 时间 类型 操作

Novel piezoelectric pump with “E”-shaped valve found from sub-experiments

Jianhui ZHANG, Jun HUANG, Xiaoqi HU, Qixiao XI,

期刊论文

A novel flow electrode capacitive deionization device with spindle-shaped desalting chamber

期刊论文

Nonlinear sealing force of a seawater balance valve used in an 11000-meter manned submersible

期刊论文

Artificial bee colony optimization for economic dispatch with valve point effect

Yacine LABBI,Djilani Ben ATTOUS,Belkacem MAHDAD

期刊论文

Development of a novel two-stage proportional valve with a pilot digital flow distribution

Qiang GAO, Yuchuan ZHU, Changwen WU, Yulei JIANG

期刊论文

Right coronary occlusion following transcatheter aortic valve implantation: two case reports

null

期刊论文

improving left ventricular remodelling and clinical outcome following surgical and trans-catheter aortic valve

期刊论文

Fluid damping clearance in a control valve of injector

ZHANG Jianming, ZHANG Weigang, YANG Bing, WANG Yawei

期刊论文

Bending performance of composite bridge deck with T-shaped ribs

Qingtian SU, Changyuan DAI, Xu JIANG

期刊论文

V-shaped substrate for surface and volume enhanced Raman spectroscopic analysis of microplastics

期刊论文

Solution to economic dispatch problem with valve-point loading effect by using catfish PSO algorithm

K. MURALI,T. JAYABARATHI

期刊论文

Piezoelectric pump with flexible venous valves for active cell transmission

期刊论文

Performance of vertical axis water turbine with eye-shaped baffle for pico hydropower

Zhuohuan HU, Dongcheng WANG, Wei LU, Jian CHEN, Yuwen ZHANG

期刊论文

A hybrid BFA-PSO algorithm for economic dispatch with valve-point effects

T. Jayabarathi, Prateek Bahl, Harsha Ohri, Afshin Yazdani, V. Ramesh

期刊论文

Parametric computational study on butterfly-shaped hysteretic dampers

Ali Reza FARZAMPOUR, Matthew Roy EATHERTON

期刊论文